Which tray type should I choose for my distillation column?

Sieve trays suit clean services with steady loads at the lowest cost. Fixed valve trays add fouling resistance and better turndown. Floating valve trays handle wide load variations with high efficiency. Bubble cap trays are used where very low liquid rates or positive liquid sealing are required. Our engineers recommend a tray type after reviewing your vapor and liquid loads, operating pressure and fouling tendency.

When is structured packing better than trays?

Structured packing is generally preferred for vacuum distillation, heat-sensitive products and revamps that need more capacity or efficiency within the same shell, because it offers a much lower pressure drop per theoretical stage than trays.

What materials do you manufacture column internals and wire mesh in?

Standard materials include stainless steel 304, 304L, 316 and 316L. Wire mesh is also produced in Hastelloy, Monel, Inconel, nickel, titanium, copper, brass and phosphor bronze. Other alloys can be supplied to project specification.

Do you export to buyers outside India?

Yes. Ambani Metals exports to more than 20 countries including the UAE, USA, Australia, Canada and the wider Gulf region, with export packing and shipping documentation prepared for each order.

What information is needed for an accurate quotation?

Share the column diameter, number of trays or packed bed height, material of construction, design pressure and temperature, process data sheet or drawings, required quantity and delivery destination. For wire mesh, provide alloy, mesh count, wire diameter, weave type and roll or panel size.

Service	Sheet Metal Fabrication Service
Material Options	Stainless steel, carbon steel, aluminum, galvanized steel, copper and brass are available.
Thickness range	0.5 mm – 10 mm, customized materials supported.
Thickness tolerance	±0.1 – ±0.2 mm
Compliance	RoHS / REACH available upon request
Material certificates	Mill Test Certificate (MTC) available

Capabilities

Laser cutting

Metal stamping services involve shaping metal sheets using stamping dies and presses to create various components and products.

Punching

Punching sheet metal is a high-speed, cost-effective manufacturing process using a punch and die to create precise holes or shapes(like slots, louvers, embossments) in metal sheets

Deep Drawing

Deep drawn stamping is a metal forming process that creates seamless, hollow parts from sheet metal through progressive die stamping.

Bending

Bending sheet metal involves deforming flat metal into angular shapes (V-bends, U-channels) by exceeding its yield strength using force, common methods include press braking (machines with punches & dies for accuracy) or manual techniques like using clamps, vices,and wooden blocks to create bends

Stamping

Metal stamping services involve shaping metal sheets using stamping dies and presses to create various components and products.

Welding

Welding sheet metal involves joining thin metal pieces, commonly using MIG or TIG welders, with key challenges being heat control to prevent warping and blow-through.

Product show

Sheet Metal Material Options

Material Category	Common Grades	Thickness Range (mm)	Key Features	Typical Applications
Stainless Steel	304 / 304L	0.5 – 6.0	Good corrosion resistance, clean appearance, widely used	Enclosures, brackets, cabinets
	316 / 316L	0.5 – 6.0	Excellent corrosion resistance, suitable for harsh environments	Medical, food, outdoor equipment
	430	0.6 – 4.0	Magnetic, moderate corrosion resistance	Home appliances
Carbon Steel (Mild Steel)	Q235 / ASTM A36	0.8 – 12.0	High strength, low cost, good weldability	Frames, structural parts
	SPCC / DC01	0.5 – 3.0	Smooth surface, ideal for painting and coating	Electrical enclosures
	SPHC	1.2 – 6.0	Hot rolled, high strength	Industrial equipment
Aluminum	5052	0.8 – 6.0	Excellent bending performance, good corrosion resistance	Housings, electronic parts
	6061-T6	1.0 – 10.0	High strength, suitable for structural applications	Industrial components
	3003	0.5 – 4.0	Good formability, cost-effective	General sheet metal parts
Galvanized Steel	SGCC	0.6 – 3.0	Zinc-coated for corrosion protection	Indoor structural parts
Galvanized Steel	SECC	0.6 – 2.0	Smooth surface, good for powder coating	Control cabinets
Copper	C1100	0.5 – 3.0	Excellent electrical and thermal conductivity	Electrical components
Brass	C360 / H59	0.8 – 5.0	Easy machining, attractive appearance	Terminals, decorative parts

Sheet Metal Surface Finishing

Manufacturing process flow

About our factory

Fute founded in 2004, the factory area is 5500 square meters, now has morethan 90 employees.from designers and engineers to production personnel, welders and machine operators, and quality inspectors, providing full-link metal processing customization for global customers.As an industry-leading sheet metal manufacturing supplier, serving various manufacturing fields,including but not limited to automotive, electronics, medica, home gardening and other fields, providingmetal customization for the world

FAQ

How can I get sample?

1) Sample fee will be free if we have in stock, you just need to pay the shipping cost is OK.

2) The sample of your own design needs to pay for the mold set up charge, Samples production takes 5-7 working days after set up charge received & size drawing approval.

How can I get the quotation?

1) Detailed drawings (CAD/PDF/DWG/IGS/STEP/JPG files)

2) Material requirement.

3) Surface treatment.

4) Quantity (per order/per month/annual).

5) Any special demands or requirements, such as packing, labels,delivery,etc.

How to pay for the order?

1) Alibaba Trade Assurance 2) Paypal 3) TT 4) L/C

What's the lead time?

Sample: within 10 days.

Mass Production: within 10-25 days after payment down.

Rush Services Available Sample: within 10 days.

What is the shipping method?

Most of the goods were sent out by international airway express company like DHL, UPS,FedEx, TNT. Usually takes around 3-5 working days (door to door service), We also can arrange shipment via seaway.

I want to keep our design in secret, can we sign NDA?

Sure, we will not display any customers' design or show to other people,we can sign NDA.

Custom Aluminum Stainless Steel Fabrication Stamping Parts Laser Cutting Part Sheet Metal Fabrication

Product Description